Direct answer: Short answer: once a year for most Madison homes, and it matters more here than in soft water towns. Davidson County hardness settles in the tank bottom as sediment, and a yearly drain keeps that layer loose, thin and quiet.
A simple yearly rhythm
Tie the drain to a date you already keep, a birthday month or the fall clock change. Power or gas off, hose on the drain valve, a few gallons out until it runs clear, or a fuller drain if sediment is heavy. While you are there, test the temperature and pressure relief valve lever briefly and check the anode rod every few years, because that rod is quietly spending itself to protect the tank.
What you will see, and what it means
First water out of a neglected Madison tank can run milky or rusty with grit that rattles in the bucket. That is the layer that makes heaters rumble, overheat lower elements and die early. If the drain valve itself clogs with sediment and will not flow, do not force it, that is a service visit, and it is also information about how much is sitting in the tank.
Tankless owners have a different job
Tankless units do not get drained, they get descaled: isolation valves, a pump, and a descaling solution through the heat exchanger, yearly in our water. Skipping it is why Madison tankless units throw codes and go hot and cold mid shower. If your unit has service valves fitted, the job is planned and clean, and we can show you the rhythm while we do the first one.
Quick checklist
- Yearly drain added to a fixed date
- Relief valve tested while you are there
- Anode rod checked every few years
- Tankless units descaled, not drained
Related reading and services
Helpful outside reading: Moen faucets and support and Rheem water heating.
